Automotive Engine Repair Process

As vehicle engines become old, or improperly maintained, internal engine component failure can occur. While some vehicle owners may choose to simply buy a new car, there are many people that want to repair their engines so that they do not have to take on a car payment for a new car. Especially in this economy, it is understandable how people want to stretch their money as far as it can go. In many cases, rebuilding a damaged engine is more cost effective then buying a new car in the long run.

When an engine has failed, a skilled automotive technician will remove it from the vehicle. This is a laborious process and can often cost around seven hundred dollars to remove and reinstall automotive engines. Once the engine is out of the vehicle, it normally is given to a skilled engine builder for further assessment.

Once the engine builder has the engine, it will be carefully disassembled. Notes will be taken during this process to document the damage found. Once the engine is completely disassembled, all of the components are chemically cleaned to remove the oil, carbon and any contaminates. At this point, the engine builder can use specialized measuring tools to determine whether or not the internal engine parts are within acceptable tolerances. After a full assessment is made, the engine builder will then quote out the parts and labor necessary to repair the engine.

The labor to repair an engine is the largest component of the overall engine repair bill. In many cases the cylinder block must be bored, new pistons installed on the connecting rods and the cylinder heads reconditioned. Another labor intensive process is repairing the crankshaft.

When you hear people saying that their engine has a “spun bearing,” this simply means that one of their crankshaft bearings has failed. Bearing and crankshaft failure, by most accounts, are the leading cause of failed engines being removed from vehicles. When the crankshaft must be reconditioned, the process is completed in a crankshaft grinding machine. The equipment to perform this task can cost well over $50,000, which is why repairing crankshafts is not inexpensive.

After all of the engine components have been repaired or replaced, an engine builder will thoroughly clean all of the components before assembly. This is needed to remove any contaminates from the internal engine parts. With clean parts in hand, the engine builder may assemble the engine in a clean environment so that it is ready for the automotive technician to install.

After the automotive technician has installed the rebuilt engine, in most cases they will offer a limited warranty of one to three years. This warranty assures vehicle owners that the investment they made in repairing their engine is protected by a contract. With a typical car payment being $300 or more each month, vehicle owners can often save nearly $10,000 when they repair a failed engine instead of buying new. In these tight economic times, those savings can allow consumers the opportunity to save a significant amount of money over just a few years.

Posted in Uncategorized | Comments Off

How To Have A Career In Automotive Engineering

Many students these days are looking for education to sustain a good career. Usually, the education that a person has will lead to his future work. In this case, it is best if you could get a degree that you like. In the future, you will have a career where you can use your knowledge and be happy with it. One of the most popular degrees is the automotive engineering degree. This means a student needs to learn the basics of automotives as well as its application to our lives. If the person is interested in pursuing this career, then he should have quality education. Although there are many other courses available, such a degree can be an exciting one for students. This is true with those who are car enthusiasts themselves.

How do I start a career in automotive engineering? There are many schools that you can enroll in. First, you need to search for a good one that can teach you things. The school is the very foundation of your degree. Therefore, it is best that you have quality education from a reputable school. Usually, you can find them offering automotive engineering courses. However, it is also better if they can offer more related degrees. Some of the common ones are mechanical engineering or even a degree in fluid mechanics. If the school has a great facility, then you can enroll in it. Moreover, it may help if you can find many feedbacks for the school. Of course, you need to know if they can really provide you quality education. This will serve as your training ground for your future career.

How to be successful in getting an automotive engineering degree? There are many ways to have a better career in this industry. Of course, it will all start with good learning habits. At school, you need to know the basics in order to survive your education. First, you need to be very attentive to the lessons in class. This is very important because you should have an idea about engineering matters. Second, it is best if you could participate in hands on training sessions. Automotive engineering is not all about pen and paper. You also need to apply your skills in actual activities. Therefore, you should also do well in laboratory skills.

There are many types of careers waiting for you in this segment. Usually, the careers involve cars and pother vehicle mechanics. You can be an engineer for car manufacturers. You can easily become a consultant for safety and vehicle integrity. Or, you can also become a part of an organization that promotes automotive safety awareness. As you can see, there are many possibilities for you to have a career in this field. All you need to have is a good set of education and experience. You can easily land on a job that you will love. In any case, you should start building your credentials today. So looking for a good school is your primary concern as of the moment.

Posted in Uncategorized | Comments Off

Automotive Engineering: A Way to a Successful Career

One of the best courses nowadays is automotive engineering. It involves examining the operating standards of vehicles. It may also comprise of proficiency management, mechanical system, hydraulic system and electrical processes. Since the industry of automotive is quickly growing, there are several people who want to have a degree program in automotive courses.

Some of the degree programs of automotive engineering offer lots of courses in mechanical engineering and automotive design engineering. The colleges that offer this kind of course give direct application and hands-on training for an array of careers in the industry. This course specializes in the field of vehicle engineering and it can be divided into three main fields of study. The three main fields of this course are manufacturing, development and production.

Manufacturing engineers are those involved in making and building different automobiles, while development engineers are those who were involved on the different attributes of a sedan that includes speed, durability and performance. On the other hand, production engineers focus more on the design systems and components of a vehicle. It also involves designing and testing of the vehicles’ parts and includes coordinating tests to make sure that all automobiles meet the national standards set by the government.

Automotive engineers have several responsibilities and job description that they need to comply with after completing all their trainings. As they finished the degree program of this course, engineers can now design the car’s systems and components. They also need to determine the best attributes for a specific sedan or for a future vehicle.

They also need to develop codes and standards for a well-organized manufacturing. Automotive engineers must determine the costs and implement the procedures to lessen the production costs. They are also expected to introduce and develop new strategies and systems for the production of automotives. In addition, they also need to make sure that they follow the government regulations during the process of the making a vehicle.

Aside from developing and designing, they also need to determine the drive ability of the each vehicle. They also need to implement quality procedures and control strategies. When there is a problem, they also need to solve all the troubles in automotive engineering. Lastly, they must conduct statistical analysis as required. All the graduates from this course can have several career options like vehicle manufacturing engineer, operations research, systems engineer, vehicle dynamics controller, performance engineer, noise, vibration and harshness engineer (NVH), emissions controller or research and safety engineering.

Posted in Uncategorized | Comments Off